Flexible Filament-TPU
Details
TPU material with its high elastic characteristics feels like rubber that bounces back and forth into the shape.
This material is good for FDM printers that at the same time can be used for ABS and PLA filaments.
Printing temperature range for TPU filaments is 210 – 230°C. The material has high elasticity and excellent abrasion resistance, as well as consistent diameter and smooth feeding properties.
Filament easily sticks to build platform and bonds between layers.
All mentioned above allows to print high-quality things. The material doesn’t contain any toxins but still is not recommended for food contact pieces.
Tech Specifications
- Density - 1.1 g/cm³ (69 lb/ft³)
- Dielectric Constant (Relative Permittivity) - 3.6
- Dielectric Strength (Breakdown Potential) - 24 kV/mm (0.94 V/mil)
- Elastic (Young's, Tensile) Modulus - 4.0 GPa (0.58 x 10⁶ psi)
- Electrical Resistivity Order of Magnitude - 14 10 x Ω-m
- Elongation at Break - 5.0%
- Specific Heat Capacity - 1760 J/kg-K
- Strength to Weight Ratio - 68 kN-m/kg
- Tensile Strength: Ultimate (UTS) - 75 MPa (11 x 10³ psi)
- Thermal Conductivity - 0.6 W/m-K
- Thermal Diffusivity - 0.31
- Thermal Expansion - 100 µm/m-K
Material Properties of High Impact Polystyrene [HIPS]
- Temperature - 210°C
- Flow Tweak - 0.91
- Bed Temperature - 75°C
- Bed Preparation - Apply glue stick 2 layer